RAW CONCEPT

Raw Concept is a technology that can create lightweight clubs, this technology is used in some of the lightest floorball clubs from Fat Pipe.

Classic carbon shafts have six or seven layers of carbon fiber, each layer 0.15mm thick. Shaft Raw Concept has 11 layers of carbon fiber, each with a thickness of only 0.07 mm. The use of multiple extremely thin layers ensures high flexibility and elasticity while maintaining a very low overall weight.

The "RAW" in the technology name of the stick refers to the raw design of its surface. Stick polishing is the final treatment that can break the top carbon fibers. This will not happen with unpolished floorball sticks! Unpolished floorballs have a higher quality than a polished shaft. The negative factor of this procedure is design flaws, such as the surface of the stick being uneven and bubbles may be visible.

T-RAW

T-RAW technology is created to achieve maximum performance and precision on the floorball court. T-RAW technology brings revolutionary innovations for Fatpipe floorball sticks. The main goal was to create a floorball that meets the needs of technically proficient players and provides them with easier control.

An important element of T-RAW technology is the strength and flexibility of floorballs. Thanks to advanced construction and the use of high-quality materials, these floorball sticks are resistant to stress and have excellent flexibility, which will bring you higher speed and accuracy when shooting.

Another important feature is the ergonomic design of the T-RAW sticks. These floorball sticks are designed to fit perfectly in the hand and provide maximum control over the ball. Thanks to this, you can easily perform technical feints, quick changes of direction and precise passes.

The construction of these clubs allows for optimal weight distribution, precise club response, allowing you to reach your maximum potential and gain an advantage on the course that will help you achieve your best performances.

Fat Pipe Jab FH2

The Jab blade is Fat Pipe's most successful floorball blade. Even though the entire blade is slightly pre-bent, the main one is the pre-bend of its tip. This pre-bend forms a cup, which gives you better control over the ball. Control over the ball is further improved by the fact that this pre-bent tip closes downwards.

The cup on the tip of the blade will greatly help you with technique and loops. Also thanks to this tip, you can shoot very well with it in a pull. The jab is a medium concave blade. It has a reinforced foot and, at the same time, a filled lower and upper edge of the blade. The blade is therefore very strong and you can really lean into the shots!

Even though the blade is concave, its backhand side is quite flat, so it will fly well even with the backhand. Its weight is 71 grams.

FH

FH, or factory hook, means factory bending (pre-bending) of the blade. It doesn't matter if this blade is JAB, ORC, PWR or even BONE. FH technology (bend) can be applied to any blade. So what is FH? FH is a simple pre-bend of the blade. The classic production process ends when the blade is pressed. The FH bend continues here. The blade heats up and its tip bends inwards and downwards. According to the degree of bending, we distinguish 2 types of FH bending:

• FH2 - slight bending of the tip of the blade
• FH4 - significant bending of the tip of the blade

A blade modified in this way will help you with loops, pull-ups, wrist shooting and a little bit with pull shooting, but it is not significant in pull shooting. There is almost no difference to the original version of the blade in the hammer and backend shot.

Fat Pipe Sticky

The FatPipe Sticky wrap is made of non-slip material that absorbs sweat very well.

Key properties:

• maximum comfort
• width 2mm
• extra long life
• possibility to choose from several colors

Not perforated (=punched).