Floorball blade is practically the most important part of floorball stick. Most influences the characteristics of the entire floorball stick during the game itself. But what influences the characteristics of floorball blades? Each manufacturer tries to reach as many players as possible, so you will find different blades from completely straight to much curved, left, right, reinforced, hard and soft, but what affects the characteristics of the blade most is the material from which it is made. Floorball blades are made of 2 materials. Read more about each blade parameter below.

Blade SIDE

Choose the side where you hold the stick as follows - if you hold the stick:

• left hand down, select "left"
• right hand down, select "right"

Blade Material by Unihoc:

• PP - polypropylen
• PE - polyethylen

How do you know what material your blade is made of?

While this may seem difficult, it is not! Each blade has a pressed wheel on its backand side. On this wheel you will find two pairs of letters - PP and PE. Between these marks there is an arrow that points to the material from which the blade is made. On Floorball baldes you can find several hardness of floorball blades. The PE blades have the following hardness:

• Soft
• Medium
• Hard

If you are looking for the blades that are made of the PP material, you will find it under the hardness below:

• Soft - lightweight
• Medium - lightweight
• Hard - lightweight

What does the material tell you about your blade?

If you know the material from which the blade is made, you will actually know everything about your blade. The material affects all the properties of the blade, so we have prepared for you the advantages and disadvantages of both materials.

Polypropylen (PP)

• A newer type of material.
• The PP is becoming more and more popular.
• The polypropylen is not as stiff as the PE material, resulting in better bending when shooting.
• The softness of the PP does not bounce a ball as much as the PE material. It improves the ball handling.
• The "rubberiness" of the material causes the ball to bounces away from the blade minimally, but it also has a negative effect on the speed of shots.
• The PP material transfers energy to the ball worse than the PE material.
• The blade of this material cannot be bent a lot. The PP material causes the blade to return to its original shape.
• The PP material is rougher than the PE. This point causes problem when shooting on a rubber floor. It scrubs when players shoot by pulling.
• You can recognize the PP material on the first sight, because it's matte material.

Polyethylen (PE)

• A classic blade material.
• Excellent material strength ensures that the shaft energy is well transferred through the blade into the ball.
• This material feels harder than the PP.
• Players can bend the blade according to your needs.
• This material is excellent on the rubber surface.
• The blade is more shiny, that means the ball handling can be more difficult than in case of the PP blade.

Hardness blades Unihoc

Unihoc produces three classic hardnesses (hard, medium and soft) in PE (polyethylene) and medium and hard hardness in PP (polypropylene). PP blades are referred to as Feather Light (medium hardness) and Titanium (hard). These blades are 4g lighter and are more flexible and support ball work. Balloon from the blade does not bounce so much, but less bent in the shot.

• Soft - PE soft
• Medium - PE medium
• Hard - PE hard
• Feather Light Medium - PP medium hardness
• Titan - PP hard